Testing day

Once all of the programming, building and debugging had been completed it was test day. The first thing on test day was to set the robot to the ambient light conditions experienced in the room which meant changing the program slightly to accommodate for this. Redo any last adjustments and then our line follower was off. Having came to Test day we still realised we needed to have a lot more debugging process ,the motors did not produce enough torque, one of the circuits driving the motor board was not working correctly as one of the motors would not go backwards (not a problem for line follower mode but for symbol mode it was).

Our tests went significantly better then the Marked test from the lecturer , our robot managed to sense the line but it did not have enough torque to turn. And on the symbol mode our robot managed to only recognise the Left and Right turn but the action that they performed was not 90 degrees left and right , instead they just continually span round.